IKA 研磨机 Multidrive control MT package 多功能破碎仪控制型可灭菌研磨杯套装
描述
  • 描述 ●

  • 技术参数 ●

  • 下载 ●

  • 选配件 ●

  • 视频 ●

描述
MultiDrive control MT Package 多功能破碎仪
控制型可灭菌研磨杯套装
Crushing without cross-contamination - this is possible with the MultiDrive control package including autoclavable disposable tubes MT 150 and the required TC 1 protective housing for dry samples.

MT 150 is a disposable tube with a typical stainless steel beater. The plastic milling tube can be autoclaved. This effectively prevents cross-contamination even if it is used multiple times. An integrated RFID chip simultaneously stores and limits the lifespan of the milling tube. 5 spare seals are included in the scope of delivery. By replacing the seal, the service life of the grinding chamber can be extended. The disposable tube can only be operated with the TC 1 protective housing which is also included in the scope of delivery.

MultiDrive universal crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. There is a USB interface available for easy actuation and documentation respectively. 

> High performance 
Excellent crushing performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm, and a 1000 Watt output.

> Interval operation 
The option of interval programming is simple to activate at the press of a button. Interval operation is an asset during the coarse crushing of hard samples or for extra thorough blending.

> Integrated cooling 
A cooling system is integrated in the milling cup, which allows indirect heat dissipation. Thus, coolant and sample remain separate.

> TFT-display 
A clear TFT-display guarantees user-friendly operation.

> Temperature measurement 
MultiDrive control offers temperature measurement and vessel recognition using RFID. A temperature limit can be set for temperature-sensitive materials, or for specific planned reactions to protect against overheating.

> Weighing function 
The weighing function is also integrated into the user-friendly workflow of the IKA MultiDrive control. Weighing is performed before crushing using the same mixing cup, so that no transfer of contents is required.

描述
交货清单
·
·
·
IKA MultiDrive control
MultiDrive TC 1 Protective housing
MultiDrive MT 150.5 Milling tube, autoclavable

技术参数

工序类型

分批处理

工作原理

切割/冲击/混合/分散

电机输入功率

1000 W

电机输出功率

800 W

速度范围

3000 - 20000 rpm

速度偏差

±5 %

工作时间 开

5 min

工作时间 关

10 min

电机原理

无碳刷直流马达

显示屏

TFT

RFID读写器单元

温度显示

温度测量精度

0.1 K

温度测量精确性

±1 K

最低温度限制。

-50 °C

最高温度限制。

120 °C

监控维护时间

称重功能

称重范围

5 - 4000 g

称量分辨率

1 g

最大称重能力

4 kg

称量准确度

±(0.3%+2) g

腔体识别

编程功能

外形尺寸

300 x 350 x 250 mm

重量

8.5 kg

允许环境温度

5 - 40 °C

允许相对湿度

80 %

DIN EN 60529 保护方式

IP 31

USB接口

Bluetooth接口

电压

220 - 240 V

频率

50/60 Hz

仪器输入功率

1000 W


选配件 – MultiDrive control MT Package
货号:0025003968
货号:0025003968 ¥ 8,017
货号:0025003966
货号:0025003966 ¥ 9,120
货号:0025003962
货号:0025003962 ¥ 5,814
货号:0020023174
货号:0020023174 ¥ 1,199
货号:0020023489
货号:0020023489 ¥ 846
描述
货号:0020023167
货号:0020023167 ¥ 1,159
货号:0020023168
货号:0020023168 ¥ 2,350
货号:0020023170
货号:0020023170 ¥ 784
描述
<
>
描述
微信扫一扫 

MultiDrive control MT Package
¥ 34,969
含13%增值税
订货号: 0010007103                                     
IKA 研磨机
cart我的购物车 0
点击购买
联系在线客服

我们的应用专家还向您建议以下产品